Anxin Mould
Send a drawing

Huangshi, Hubei, China — Plastic extrusion moulds

Extrusion moulds
Six series

Extrusion moulds for windows and doors, wood-plastic composite, plate film, pipe, foaming profiles and decoration materials — made in Huangshi, Hubei. Every price is quoted from your drawing. No price, lead time or certification is published on this site, because none was verified.

Series
6
Site
6,000 m²
Workshop
2,000 m²
Output
800+ sets / year

The factory

One workshop, six series

Hubei Anxin Plastic Moulds Co., Ltd. makes plastic extrusion moulds in six series: windows and doors profiles, wood-plastic composite, plate film, pipe, foaming profiles and decoration materials. Production is specialised by mould type and machined with CNC numerical processing, and the factory undertakes designs and processing of extrusion products plus engineering guidance.

The factory works on a stated principle of high efficiency, high quality and low cost, from a 6,000-square-metre site with a 2,000-square-metre production workshop. What is not on this page is deliberate: no price, lead time or certification is published here, because none was verified — the questions section at the end says exactly what is still to be confirmed. Factory contact details are published in the footer below.

Legal name
Hubei Anxin Plastic Moulds Co., Ltd. · 湖北安信塑料模具有限公司
Location
No.22-8 Xinggang RD, Huangshigang Industrial Park, Huangshi City, China 435000
Total area
6,000 square metres
Production workshop
2,000 square metres
Technical team
More than 20 senior technical personnel; more than 60 technical staff
Annual output
More than 800 extrusion mould sets per year
How it works
CNC numerical processing, with production specialised by mould type
Working principle
High efficiency, high quality and low cost
Services
Designs and processing of extrusion products, plus engineering guidance
Not published yet
No price, lead time or certification is published on this site, because none was verified — all are to be confirmed by the factory before launch. Factory contact details are published in the footer below.

The moulds

Three of the thirteen lines

Three of the thirteen lines we run. The rest are in the full index.

Illustration: abstract extrusion die block with profile cross-sections, not a factory photograph

Plastic Extrusion Mould

The general extrusion mould range, covering windows and doors, wood-plastic composite, plate film, pipe, foaming profiles and decoration materials.

Price on enquiry — quoted from your drawingDetails →

See all thirteen lines

What is verified

Nothing invented, nothing hidden

No price band is hidden here and none is invented either: no price, lead time or certification was verified for this factory, so none is printed. What follows is only what the Made-in-China store page states.

6,000 m²
Total area
2,000 m²
Production workshop
20+
Senior technical personnel
60+
Technical staff
800+
Extrusion mould sets per year

Verify before you order anything: ask for the business licence and a live video walk-through of the workshop, and agree the die design and the quoted price in writing before anything is cut. That is buyer advice, not a factory promise — no trial run, sample, warranty or inspection service is claimed on this site, because none was verified.

How ordering works

Drawing to running line

A profile drawing (DXF or PDF) or a sample with dimensions, the material you run, and the line or application it is for. That is what a price is quoted from — there is no published price band to read it off.

Buyer questions

Asked before you order

What mould series are covered?

Six series, as listed on the factory’s Made-in-China store: windows and doors profiles, wood-plastic composite, plate film, pipe, foaming profiles, and decoration materials. The thirteen products on this site are grouped under those six series; where a product does not sit neatly in one series, its page says so plainly instead of inventing a new series.

How is a mould priced?

On your drawing. Every product on this site carries the same price line: “Price on enquiry — quoted from your drawing”. No price band is published here, because none was verified — a band copied from another factory would be invented, not quoted.

What do you need from me to quote?

A profile drawing (DXF or PDF) or a sample with dimensions, the material you run, and the line or application it is for. That is enough for the factory to price the die set from the drawing.

Can I verify the factory before ordering?

Yes, and you should. Ask for the business licence and a live video walk-through of the workshop, and start from the drawing — agree the die design and the quoted price in writing before anything is cut. That is buyer advice, not a promise made on the factory’s behalf: no trial run, sample, warranty or inspection service is claimed on this site, because none was verified.

What is not published on this site yet?

Price, lead time and certification. None of those was verified, so none is printed here — they are all to be confirmed by the factory before launch. The factory’s contact details are published in the footer below. Enquiries sent through the form on this page go to the site team’s receiving inbox (see the README), which handles quotation intake.

How do I contact the factory directly?

Use the address, landline, mobile and email published in the footer below. There is no published WhatsApp number yet, so use the email or the phones listed there.

Get a price

Send a drawing

Attach the drawing if you have it ready. Every price is quoted from your drawing — no price band is published on this site. Your drawing is stored privately and used only to quote your job.

PDF, DXF, STEP or ZIP, up to 25 MB. Stored privately, used only to quote your job.

Your drawing is used only to quote your job. It is never shared.

Request noted. Thank you — your drawing is stored for quotation.